JED 603 Corona Discharge Ozonator Kit
with BUILT IN OZONE AIR PUMP for
Pools, Spas/Hot Tubs, Bilges, Water Tanks, Fountains, Cisterns
Compare to Delzone, Prozone and others. JED has more ozone for much less.
The JED 603 manufactures ozone using the European method of an internal corona discharge chip. CD chip generation is preferred because it is believed to produce a consistent amount of ozone while the ultraviolet type units may lose effectiveness as the bulb gets weaker over time.
JED 603-Description-
The JED 603 is designed for water purification in commercial hot tubs, small pools, fountains, cisterns and water tanks. The JED 603 is supplied in a plastic rainproof enclosure that can be wall mounted outdoors. The JED 603 has its own air compressor that can pump ozone into a pool, tub, or tank up to 24 hours a day independently of water circulation. The JED 603 is typically installed in conjunction with an over the side kit. It can also pump ozone into a venturi injector. The JED 603 works well for pools with multi-speed pool pumps. When venturi suction drops during low speed pump cycles, the JED 603 compensates for low venturi suction by pumping ozone into the venturi injector. Air flow is perfect and ozone output is uniform even during low suction periods. JED 603 can pump ozone to a depth of 4 feet in water.
It is rated at 20,000 hours of use, which is about 10 years of normal usage and can ozonate spas or pools up to 5000 gallons. This is a very high quality unit for residential or commercial use.
-Ozone output - 200 MG per hour
-Operating current - 0.67 Amps
-Power consumption - 80 Watts
-Dimensions - 9 1/2" x 8 1/2" x 4 1/2"
-Input Voltage - 120V 0R 240V
-1 year manufacturer's warranty
KIT INCLUDES:
-JED 603 ozonator with built in OZONE AIR PUMP
-cord/wire with plug end of your choice
-one way check valve
-1/4" ozone resistant tubing with over the side air hose & bubbler
PLUG TYPES
OZONE INJECTION
Over the Side Air Hose & Bubbler (Included)
Note: Ozonators are for outdoor use only.
